The Relationship Between Torque and Horsepower

      We’ve been discussing gear trains for some time now, and last time we posed the question:  Why even bother using a gear train and performing complex computations to arrive at a desired torque for an application?   Why not just use a bigger motor to start with?   Today we’ll see why.

      First, we must acknowledge that sometimes higher torque is achieved by simply using a more powerful motor.   But sometimes this isn’t possible or practical.

      To begin our discussion, we must first understand how torque is related to motor power, the amount of mechanical work a motor can perform.   Torque is in fact a function of how much mechanical power a motor produces.   In the United States motor power is typically measured in units of horsepower.

      The following equation illustrates the relationship between torque, horsepower, and motor speed:

T = [HP ÷  n]  ×  63,025

where T is the motor shaft’s torque in units of inch-pounds, HP is the motor’s horsepower, and n is the speed of the motor shaft in revolutions per minute (RPM).   The number 63,025 in the equation is a constant used to convert the units of horsepower and RPM into units of torque (inch pounds).   This equation applies to all sources of mechanical power.   Its versatility enables design engineers to easily determine if a mechanical power source can deliver the torque required to drive a particular piece of machinery.

      The torque equation above tells us that in order to get a higher torque T for a given speed n, you’ll have to get a motor with a higher HP.   Put another way, if your speed remains constant and you use a motor with higher horsepower, you’ll get more torque for your application simply by increasing the horsepower.

      Next time we’ll plug numbers into our equation and see how it all works.


Tags: , , , , , , , , , ,

Comments are closed.