## Transistors – Voltage Regulation Part II

I joined the Boy Scouts of America as a high schooler, mainly so I could participate in their Explorer Scout program and learn about electronics.  I will forever be grateful to the Western Electric engineers who volunteered their personal time to stay after work and help me and my fellow Scouts build electronic projects.  The neatest part of the whole experience was when I built my first regulated power supply with their assistance inside their lab.  But in order to appreciate the beauty of a regulated power supply we must first understand the shortcomings of an unregulated one, which we’ll begin to do here.

Last time we began to discuss how the output voltage of an unregulated power supply can vary in response to power demand, just as when sprinklers don’t have sufficient water flow to cover a section of lawn.  Let’s explore this concept further.

## Figure 1

Figure 1 shows a very basic representation of a microprocessor control system that operates three components, an electric relay (shown in the blue box), buzzer, and light.  These three components have a certain degree of internal electrical resistance, annotated as RR, RB, and RL respectively.  This is because they are made of materials with inherent imperfections which tend to resist the flow of electric current.  Imperfections such as these are unavoidable in any electronic device made by humans, due to impurities within metals and irregularities in molecular structure.  When the three components are activated by the microprocessor chip via field effect transistors, denoted as FET 1, 2 and 3 in the diagram, their resistances are connected to the supply circuit.

In other words, RR, RB, and RL create a combined level of resistance in the supply circuit by their connectivity to it.  If a single component were to be removed from the circuit, its internal resistance would also be removed, resulting in a commensurate decrease in total resistance.  The greater the total resistance, the more restriction there is to current flow, denoted as I.  The greater the resistance, the more I is caused to decrease.  In contrast, if there is less total resistance, I increases.

The result of changing current flow resistance is that it causes the unregulated power supply output voltage to change.  This is all due to an interesting phenomenon known as Ohm’s Law, represented as this within engineering circles:

V = I × R

where, V is the voltage supplied to a circuit, I is the electrical current flowing through the circuit, and R is the total electrical resistance of the circuit.  So, according to Ohm’s Law, when I and R change, then V changes.

Next time we’ll apply Ohm’s Law to a simplified unregulated power supply circuit schematic.  In so doing we’ll discover the mathematical explanation to the change in current flow and accompanying change in power supply output voltage we’ve been discussing.

____________________________________________

### One Response to “Transistors – Voltage Regulation Part II”

1. […] supply limitation by revisiting our microprocessor control circuit example which we introduced in a previous article in this series on […]