Posts Tagged ‘direct current supply’

Transistors – Voltage Regulation Part XI

Monday, October 1st, 2012
     Without limits on our roadways things would get quickly out of hand.  Imagine speeding down an unfamiliar highway and suddenly coming upon a sharp curve.  With no speed limit sign to warn you to reduce speed, you could lose control of your car.  Limits are useful in many situations, including within electronic circuits to keep them from getting damaged, as we’ll see in a moment.

     Last time we introduced the Zener diode and the fact that it performs as a voltage regulator, enabling devices connected to it to have smooth, uninterrupted operation at a constant voltage.  Let’s see how it works.

Unregulated Power Supply

Figure 1


     In Figure 1 we have an unregulated power supply circuit introduced in a previous article in this series.  We learned that this power supply’s major shortcoming is that its output voltage, VOutput, is unregulated, in other words, it’s not constant.  It varies with changes in the direct current supply voltage, VDC.

     It also varies with changes in, RTotal, which is the total internal resistance of components connected to it.  RTotal changes when components are turned on and off by microprocessor and digital logic chips. When VOutput is not constant, those chips can malfunction, causing the device to operate erratically or not at all.

     But we can easily address this problem by adding a Zener diode voltage regulator between the unregulated power supply and the external supply circuit.  See the green portion of Figure 2.

Zener Diode Voltage Regulator

Figure 2


     Our power supply now consists of a Zener diode and a limiting resistor, RLimiting.  The limiting resistor does as its name implies, it limits the amount of electric current, IZ, flowing through the Zener diode.  Without this limiting resistor, IZ could get high enough to damage the diode, resulting in system failure.

     Next time we’ll see how the Zener diode works in tandem with the limiting resistor to control current flow and hold the output voltage at a constant level.